EMILYCube 2500 Portable stand-alone charging station

Share

EMILYCube 2500 Portable stand-alone charging station

SNR-SFC-EC2500

CALL

Portable power socket in the field - far portable radar systems, data acquisition terminals or optronic devices



Plug&Play: EMILYCube 2500 is entirely maintenance-free. There is no need for interventions. Only the fuel cartridge requires replacing from time to time. Replacing only takes seconds and can be accomplished while the cell is running (hot-swap). As soon as a new fuel cartridge is connected, the full capacity is available - without any charging time.

Runtime extension while reducing weight: A 10 liter fuel cartidge with a weight of only 8.4 kg has enough capacity for more than 11 kWh. A single fuel cartridge is thus sufficient to power devices @ 100 W for up to 100 hours. To provide the same amount of energy using batteries, you would have to transport 270 kg, or an abundance of fuel to operate a diesel generator!

Non-detectablity: Power supply by EMILYCube 2500 is extremely quiet and odorless. Reconnaissance of the operation by detecting power supply is virtually impossible.

Applications include:

  • Turnkey energy solution
  • High energy density
  • Silent and stand-alone
  • Hot-swap fuel cartridges
  • Ruggedised for military and robust industrial applications





Or order by phone: 1.888.779.8766
EMILYCube 2500 Portable stand-alone charging station specifications
 
General Specifications
Temperature Range -25 °C to +50 °C
Physical Specifications
Dimensions 418 x 305 x 384 mm 16.5 x 12 x 15.1 in
Power
Charging 2500 Wh
Power 100 W
Transmitter
Noise < 44 dB(A) @ 1 m / 3.28 ft < 35 dB(A) @ 2.4 m / 8 ft
Voltage 12.4 V - 30V
Weight Fuel Cell 13.3 kg / 29.3 lbs sans cartouche à combustible 21.7 kg / 47.8 lbs avec cartouche à combustible M10
Energy capacity 11.1 kWh (1 cartouche à combustible M10)
Water protection MIL-STD 810F Méthode 506.4, Procédure I
Sand and dust MIL-STD 810G Méthode 510.5 Procédure I
Vibration MIL-STD 810G Méthode 514.6C-IV
Drop MIL-STD 810G Méthode 516.6 Procédure IV
EMI / EMC MIL-STD 461, RE102-3, RE102-4
Noise emission < 44 dB(A) @ 1 m / 3.28 ft < 35 dB(A) @ 2.4 m / 8 ft
0.00 In stock